EV Charging Station Permit Design Services — AHJ-Ready in 24–48 Hours
Permit Design prepares EV charging station permit plan sets and permit drawings for residential and commercial EV charger installations across all 50 US states. Residential Level 2 installations delivered in 24–48 hours — commercial and DC fast charger projects scoped to project size and confirmed with your quote.
We cover Level 2 and DC fast chargers for homes, multi-family buildings, commercial parking facilities, fleet depots, and retail locations. If your AHJ requests revisions, we handle them at no extra charge.
HOW IT WORKS:
1. Submit — Send us your project details: site address, charger make and model, electrical panel location, and service size. Takes under 5 minutes.
2. Draft — Our EV permit design specialists prepare your complete plan set — site plan, load calculations, panel schedule, one-line diagram, and all NEC Article 625-required documentation.
3. Deliver — Residential EV charging permit plan sets land in your inbox within 24–48 hours. Commercial and DC fast charger projects are delivered on a timeline confirmed with your custom quote. Revisions handled at no extra charge until approved.
What’s Included in Every EV Charging Permit Plan Set
Cover Sheet
Project scope, charger specifications, adopted NEC edition, and complete project data — formatted to your AHJ’s standards.
Site Plan
Overhead site plan showing charger locations relative to buildings, parking spaces, accessible routes, and utility entry points.
Load Calculations
Service entrance load calculations per NEC Article 220 — verifying existing panel capacity or documenting upgrade requirements for the AHJ.
Panel Schedule
Updated electrical panel schedule showing existing loads, new EV charger circuit(s), and total connected load after installation.
One-Line Diagram
Electrical schematic from utility service through panel to EV charger — NEC Article 625 compliant for your jurisdiction’s adopted code edition.
Conduit & Wiring Details
Conduit routing, wire sizing, and installation method details per NEC requirements and local AHJ standards.
Labels & Placards
All NEC-required labels for EV charger circuits, disconnect identification, and system signage.
Equipment Datasheets
Manufacturer spec sheets for the EV charging equipment — charger unit, mounting hardware, and accessories.
Try Us Free — One Project, No Commitment
New to Permit Design? Send us your first Residential EV charger project and we'll deliver the complete permit plan set free of charge. No contracts, no setup fees, no catch. Just see the quality for yourself — then decide.
Available for first-time clients only. One free plan set per company.
EV Charging Installation Types We Cover
Residential Level 2
Home EV charger permit plan sets for single-family and multi-family residential installations — 240V, 30–50A circuits
Solar + EV Charging
Combined solar PV and EV charging permit plan sets — load calculations accounting for both systems simultaneously
Commercial Level 2
Commercial parking facility EV charger permit plan sets for retail, office, hospitality, and multi-tenant properties
EV Charging + Battery Backup
EV charging permit plan sets with battery storage integration — off-peak charging and backup power configurations
DC Fast Chargers
DC fast charger permit plan sets for high-power commercial and fleet charging stations — 50kW to 350kW
For state-specific AHJ requirements, visit our Solar Permit Drawings → page.
FAQ SECTION:
How long does an EV charging permit plan set take?
Residential Level 2 EV charging permit plan sets are delivered within 24–48 hours. Commercial installations and DC fast charger projects depend on system complexity — we confirm the timeline with your custom quote. Rush delivery available for residential projects.
What NEC articles apply to EV charging permit drawings?
EV charging permit plan sets must comply with NEC Article 625 (Electric Vehicle Charging System) and NEC Article 220 for load calculations. We apply the NEC edition adopted by your specific AHJ — 2020, 2022, or 2026.
Do you cover both residential and commercial EV charger permits?
Yes. We prepare EV charging permit plan sets for residential Level 2 chargers, commercial Level 2 installations, DC fast chargers, fleet depot charging, and combined solar-plus-EV systems.
What information do you need to prepare an EV charging permit plan set?
We need the site address, charger make and model, electrical panel location and service size, and any existing load information. Our order form walks you through exactly what to provide.
Do EV charging permit plan sets require a load calculation?
Yes. Every EV charging permit plan set includes a service entrance load calculation per NEC Article 220, verifying that existing panel capacity supports the new charger circuit or documenting the required upgrade.
Which states do you serve for EV charging permit design?
We serve contractors and installers across all 50 US states — from California Title 24 EV requirements to local building department standards in every other jurisdiction.